Conrad FHT80B-3 Instruções de Operação descarregar pdf (Página 51)

• Insert two new Mignon/AA batteries into the valve operating mechanism’s battery compart-

ment, making sure that the polarity is correct. Otherwise you may destroy the valve operating

mechanism’s electronic components!

• The display shows ‘

C1C1

C1’

followed by a 2-digit number. The display then shows ‘

C2C2

C2’, followed

by another 2-digit number (both numbers are the currently stored security code of the valve

operating mechanism)

• A signal tone is then generated and ‘

A1A1

A1’ is displayed.

• The valve operating mechanism now fully retracts the control pin.

•‘

A2A2

A2’ is then displayed.

• Briefly press the button on the valve operating mechanism.

•‘

A3A3

A3’ is displayed and the valve operating mechanism closes the valve completely.

• The antenna symbol then blinks and ‘

0%0%

0%’ is displayed.

• The first radio signal that is received is acknowledged by a signal tone, and the antenna

symbol is permanently displayed.

• Replace the battery compartment cover.

c) ‘FHT80TF-2’ door/window contact sensor

When the batteries in the door/window contact sensor are low, the device sends this

information to the heating control. The corresponding error message (the window icon ‘ ’

blinks) is shown on the heating control’s display.

You can use the ‘

FEnFEn

FEn’ special function menu to identify the door/window contact sensor

whose batteries are low.

To replace the batteries, proceed as follows:

• Open the casing by pushing the two catches on the left side of the casing approx. one

millimetre inwards using a flat screwdriver while simultaneously pulling the lid forwards.

• Remove both of the old batteries and dispose of them according to the applicable environ-

mental regulations. See section 18.

• Insert 2 new AAA batteries into the battery compartment, observing the correct polarity.

• Close the casing cover.

• If necessary, the door/window contact sensor now conducts a synchronisation procedure

that lasts approx. 1 minute (the LED blinks every second).

1 2 ... 46 47 48 49 50 51 52 53 54 55 56

Comentários a estes Manuais

Sem comentários

Conrad FHT80B-3 Instruções de Operação Página 51

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos Conrad FHT80B-3